The Beamex DPS4 System is a product created through European cooperation. The Differential Pressure Standard was developed in order to improve both the productivity and the accuracy of offshore calibrations. The new calibration consept for differential pressure transmitters presents totally new innovative thinking. The DPS4 allows the calibration of differential pressure transmitters with low differential pressure under high static pressure.
Until today, differential pressure transmitters used in offshore environment
have been removed from the process to be transported to a land based laboratory
for calibration with differential dead weight testers and then brought
back to the process installation. The DPS4 allows high accuracy calibration
of differential pressure transmitters in-situ and thus highly improves
the productivity. Also, as the calibration is done in situ, errors caused
by temperature change and transportation are eliminated.
| Reference Accurarcy | including non-linearity,
hysteresis and repeatability |
±0.3 mbar |
| Ambient Temperature Effect | -5 to 45°C | ±0.03% reading |
| Static Pressure Effect | up to 200 bar | ±0.0002% reading/bar |
| Stability | 12 months | ±0.06% reading |
| Vibration Effect | 10 to 60 Hz, 0.3 mm peak
60 to 500 Hz, 1 g |
<±0.03 mbar |
| Mounting Attitude | ±10° in any axis | <±0.03 mbar |
| RFI Effect | 20 to 1000 MHz, 10 V/m | ±0.03 mbar |
| Reference Calibration Standard Accuracy: | ±(0.07 mbar + 0.5 ppm static pressure) |
For information call:
1-800-897-6266
or email
Advanced
Measurements and Controls