Home
Dry-BlockTemperature Calibrators
NEW State-of-the-art 
dry-block temperature
calibrators 		 The JOFRA ATC series is a complete test laboratory to take out to the process line:
  • Specially designed to fulfil the EA-guidelines
  • Dual-zone heating block
  • The homogeneity in the lower zone of the block is close to that of a laboratory bath. The upper zone compensates for heat loss from the sensor-under-test and from the top of the block
  • Many features such as: Built-in reference thermometer for use with an angled external reference sensor to allow room for the sensor-under-test with transmitter head, top connector, etc. - Internal and external reference sensors are independant of each other - Automatic calibrations for thermostats, resistance thermometers, thermocouples, transmitters, milliamps, and voltage. - Software AMECAL-TEMPERATURE to customize calibration routines and to verify measurement results, downloading of calibration tasks.............
  • Get all information in our specification. sheet by using the download feature. 
  • You may also download a JOFRA calibrator-driver for National Instruments® LabVIEW™. 

Key specifications:
 
ATC-155
ATC-320
ATC-650
Temperature range
-24 to 155 °C /
-11 to 311°F
50 to 320°C /
122 to 608°F
50 to 650°C /
122 to 1202°F
Accuracy Model A
±0.19°C /
±0.34°F 
±0.26°C / 
±0.47°F 
±0.39°C / 
±0.70°F 
Accuracy Model B
±0.06°C / 
±0.11°F 
±0.07°C /
±0.13°F 
±0.11°C /
±0.2°F 
Stability 
±0.02°C / 
±0.036°F 
±0.02°C / 
±0.036°F 
±0.03°C / 
±0.054°F 
Immersion depth
160 mm / 6.3 in
150 mm / 5.9 in
150 mm / 5.9 in
Diameter of insertion tube
30 mm / 1.2 in
30 mm / 1.2 in
30 mm / 1.2 in
Calibration software included
Model A & B
Model A & B
Model A & B
Stability indicator 
Model A & B
Model A & B
Model A & B
Automatic step function
Model A & B
Model A & B
Model A & B
Automatic switch test
Model B 
Model B 
Model B 
Communication RS-232 
Model A & B
Model A & B
Model A & B
Display resolution 0.01°
Model A & B
Model A & B
Model A & B
Output for "Calibrator is stable"
Model A & B
Model A & B
Model A & B
Compartment for 2 inserts
Model A & B
Model A & B
Model A & B
Download of calibration work orders 
(up to 20)
Model B 
Model B 
Model B 
Upload calibration results to PC
Model B 
Model B 
Model B 
Input for RTD, TC, V, mA, switch
Model B 
Model B 
Model B 
Transmitter supply 
Model B 
Model B 
Model B 
Reference sensor input
Model B 
Model B 
Model B 

 
 
compac-low-fa.jpg (16429 bytes) True, fast and easy calibration with the Compact series from JOFRA INSTRUMENTS:
  • All models are delivered ready for use in alu carrying case. All necessary accessories included 
  • Calibration certificate, traceable to International Standards
    		•

  • Many built-in facilities, such as: Fully automatic switch test and hysteresis test, leaving the user free to concentrate on other things while the test is running —Automatic change from temperature to temperature. This allows the calibrator to be placed anywhere in the process while the user monitors the output from the sensor in the control room — Large LCD display with stability indicator — Specially designed heating block for fast and stable temperature calibrations — Built-in adjustment / calibration routine for the calibrator itself
  • Model C-320-2 and model C-650-2 for applications requiring extra long insertion depth
  • All models are conforming to CE-regulations

    •  

     

    Detailed specification sheet available. Use the download feature

    Key specifications:
     
    C-140
    C-320
    C-650
    Heating time to max: 
    9 min.
    4 min.
    10 min.
    Accuracy: 
    ±0.5°C
    ±0.5°C
    ±0.9°C
    Stability: 
    ±0.05°C
    ±0.1°C
    ±0.1°C
    Temperature range: 
    -30 to 140°C
    50 to 320°C
    50 to 650°C
    Cooling time: 
    12 min. to 0°C
    15 min. to 100°C
    27 min. to 100°C
    Resolution: 
    0.1°C
    0.1°C
    0.1°C
    Read-out: 
    °C / °F
    °C /°F
    °C / °F

     
     
    250-www-1.jpg (448962 bytes)
    Fast and reliable automatic calibration with the SE/RS series from JOFRA INSTRUMENTS:
     
     
  • All models are delivered ready for use in alu carrying case. All necessary accessories included 
  • Calibration certificate, traceable to International Standards 

    • All models are conforming to CE-regulations

  • Many built-in facilities, such as: Stability indicator — Automatic switch test and hysteresis test — 4-20 mA transmitter measurements — Analog output — Programmable slope rates — Standard software SoftCal for recalibration and adjustment of the calibrator — AmeCal-T software for verification of measurement results (automatic calibration and documentation software)
  • Detailed specification sheet available. Use the download feature

    •  

     

    You may also download a JOFRA calibrator-driver for National Instruments® LabVIEW™, v.5.0 and up

    Key specifications:
     
     
    140SE-RS
    250SE-RS
    650SE-RS
    Temperature range: 
    -30 to 140°C
    50 to 250°C
    50 to 650°C
    Accuracy: 
    ±0.3°C (on-site) and ±0.05°C (laboratory)
    ±0.4°C
    ±0.6°C
    Stability: 
    <0.002°C (-15/100°C), <0.008°C (100/140°C)
    ±0.05°C
    ±0.05°C
    Heating time to max:
    17 min. from ambient
    9 min.
    24 min
    Cooling time:
    37 min. to ambient 
    14 min. to 100°C
    33 min. to 100°C
    Resolution: 
    0.1°C
    0.1°C
    0.1°C
    Read-out: 
    °C / °F 
    °C / °F 
    °C / °F 
    dti-www-1.jpg (9079 bytes) Reference Thermometer DTI-1000 from JOFRA INSTRUMENTS used in many National Laboratories worldwide:
     
     

    DTI-1000 may be delivered  ready for use with 1 sensor, software, interface cable, batteries, user manual and a calibration certificate covering the Reference Thermometer system
     

     

  • More and more industries are using the DTI-1000 because it provides a simple, fast and portable external reference system, required by many QA-systems
  • Many built-in features to make the daily calibration work easy
  • Easy check of sensors in the process
  • Easy check of the calibration equipment
  • Detailed specification sheet available. Use the download feature

    •  

     

    You may also download a jofra DTI-driver for National Instruments® LabVIEW™, v.5.0 and up
     

    Key specifications:
     
    DTI-1000 Reference Thermometer
    Sensors for DTI-1000
    Temperature range: 
    -200 to 750°C
    		 Temperature range:
    -25 to 300°C 
    (-125°C to 600°C)
    Resolution:
    0.1 / 0.01 / 0.001°C
    		 Sensor type: 
    Platinum sensor 
    Pt-100
    Measuring units: 
    °C, °F and Ohm
    		 Accuracy: 
    ±0.026°C
    Accuracy: 
    ±0.014°C
    		 Alpha value: 
    0.00385
    Stability: 
    ±0.004°C
    		 Sensor length: 
    250 / 350 / 500 mm
    Input channels:
    2
    		 Diameter: 
    4 mm
    Analog output: 
    1 per channel
    		 Immersion depth: 
    Min. 80 mm
    Analog range: 
    -0.5 to 3.75 V
    		 Material: 
    Inconel
    Analog output accuracy:
    ±0.004V
    		 Response time in water: 
    tau = 30 sec.
    Analog output resolution:
    ±0.001V
    		  
    Interface: 
    RS232
    Display: 
    2 x 20 alpha numeric, backlight
    Battery operated: 
    50 hours

    For more information please call:
    1-800-897-6266
    or email
    Advanced Measurements & Controls, Inc.